Screen printing on 160-gram non-woven fabrics

- Nov 02, 2017 -

Screen printing on 160-gram non-woven fabrics

Using 40 mesh silk screen to print 60 grams of nonwoven fabric, printing in the case of multi-inking, the strength increased from left to right.

From the effect of printing, the color of the small print of the field color is 1.48, the graphics are not complete, and through the observation of the light, except the parts that are not inked, there is more light penetrating the ink layer.

Medium strength of printing ink density of 1.33, design level but the amount of ink distribution is not uniform, design of the flatness is very low, through the light observation, compared with low strength printing, light through the ink layer decreased significantly.

Printing pressure, printing ink density is 1.46, design complete smoothness is high, the uniform distribution of ink, ink layer thickness, high touch AoTuGan strongly, there are still a small amount of light spot observed under the light, but the quantity is larger than that of medium strength of printing non-woven flare.

The printing ink of three times is moderate, about a day completely dry.

There were no bubbles in the three prints.

Use 40 mesh silk screen to print 60 grams of non-woven fabric, printing in the case of less ink, the force increases from left to right.

From the effect of printing, the quality of the three prints is obviously reduced.

Ink coverage is incomplete.

The printing intensity is small, ink layer thickness is extremely low, the ink layer density is 1.31, the design is incomplete, under the light observation, the light can penetrate the ink layer completely.

The color block of medium strength printing, the shape of the pattern is more complete, but it still appears the phenomenon of dropping ink, the ink layer density is 1.41, and the ink layer as a whole is flat.

High pressure printing color block, shape integrity, appearance of lost ink phenomenon, ink layer density of 1.46, after printing, the substrate and ink appear in the fold.

The ink layer has a high thickness and a strong sense of concave.

The drying rate of three times printed ink is much faster than that of a day.

There were no bubbles in the three printing.

Used 80 mesh screen printing 60 grams non-woven fabric, in the case of less amount of ink printing, printing a increasing from left to right, with smaller efforts when printing, on-the-spot patch density of 1.51, graphics is complete, there can be some light ink through the cracks.

Ink surface level.

With medium strength printing, the density of the color block is 1.50, the ink layer is high, the shape is complete, and the printing effect of the corner is clearer.

Under the light, there is still light that can penetrate the ink layer and nonwovens, but it is significantly reduced compared with the low-intensity print field.

The density of the ink layer is 1.62 with the high strength of the field color block, the substrate nonwoven fabric and ink have obvious wrinkles, the thickness of the ink layer is the highest in the three times, and the touch has a concave relief.

Through the light, there is no light through the nonwoven and ink layer.

The printing ink of three times is moderate, about a day completely dry.

There were no bubbles in the three prints.

Used 80 mesh screen printing 60 grams non-woven fabric, in the case of much of ink printing, printing a decline from left to right, the left is high quantity of ink printing, high strength of ink quantity of printing is among, on the right is the low strength of printing.

The density of low-intensity printed color blocks is 1.44, the graphics are complete, the surface of the ink surface is low, and the light is viewed from the light.

With medium strength printing, the density of the color block is 1.48, the ink layer is higher than the low strength and the high strength of the printing effect, the graphic integrity, the corner printing effect is relatively clear.

Observed under the light, there is still light can penetrate the ink layer and non-woven fabric, but compared with the low intensity field of printing color piece spot decreased significantly, by the naked eye, light Numbers less than ten.

High pressure printing, the ink layer density is 1.53, the substrate and ink layer have the wrinkles, the ink layer thickness is the most prominent in the three prints, through the light observation, there is no light through the non-woven fabric and the ink layer.

The drying rate of three times printed ink is slower than that of ink and printing.

There were no bubbles in the three printing.

160 mesh screen printing 60 grams of nonwoven fabric

Using 160 mesh screen to print 60 grams of nonwoven fabric, printing in the case of multi-inking, printing intensity increased from left to right, and this time, the three prints are of great contrast compared to each other.

After the first test, the effect was caused by the fact that the water - based ink was blocked and the test was not much improved after cleaning.

Printing color piece under low strength is relatively complete, ink layer density is 1.45, the ink layer with substrates non-woven surface drape, design rough edges, and observed under light of light can be through the ink, ink layer surface has a wide range of light.

Medium strength printing, the mo layer density is 1.00, the ink layer is not uniform, the substrate inking volume is small, the printing effect is low, the light can penetrate the ink layer.

High pressure printing, incomplete graphics, 0.98 ink layer density, less inking volume, and light can be completely filtered through the ink layer.

Used 160 mesh screen printing 60 grams non-woven fabric, in the case of much of ink printing, printing a decline from left to right, the left is high quantity of ink printing, high strength of ink quantity of printing is among, on the right is the low strength of printing.

The density of low-intensity printed color blocks is 1.40, the graphics are complete, and the surface of the ink surface is low, and it can be seen through the light from the light.

With medium strength printing, patch density is 1.30, the pattern is complete, but the lower part has the phenomenon of ink, ink layer thickness thins from top to bottom, and observed under the light parts of ink layer thin light can completely through.

High pressure, ink layer density is 1.07, the pattern is complete, but the ink layer thickness is significantly lower than the former two, most of the ink can't printed on substrates, through observation, light light can totally three print ink drying speed compared with less ink print drying speed is slow, a day is completely dry.

There were no bubbles in the three printing.

 

_______________________________________________

WUXI JINFENG SILKSCREEN MESH MANUFACTURING CO., LTD.

Since 1996, as professional we manufacture high quality meshes at best price!
Address: Jinxin industrial zone, xibei town, wuxi city, jiangsu province, China 214194   
Emailalex_jfmesh@yeah.net  &  alex-jfmesh@hotmail.com

Website: www.silkscreen-mesh.com 

Website: www.jf-boltingcloth.com  

 

Related Industry Knowledge

Related Products